Cessna Conquest II (Model 441)
The larger, Garrett-powered Conquest on its own type certificate, A28CE. Named Conquest on the data sheet and later marketed as the Conquest II.

The Conquest / Conquest II
The Model 441 has its own FAA Type Certificate, A28CE, issued August 19, 1977 after an October 30, 1974 application. The data sheet names it the Conquest.1 It was renamed Conquest II when the 425 became the Conquest I.2,3
Power is two Garrett TPE331-8 turboprops rated 635.5 shp, roughly 40% more per engine than the 425’s PT6A-112s. Serials to 441-0339 use the -401S to -404S (interchangeable); 441-0340 on use the -406S.1,4 Maximum takeoff weight is 9,850 lb, with seating for 1 to 11 and 475 gal of usable fuel.1
Maximum operating altitude is 33,000 ft for 441-0001 to 0172 and 35,000 ft from 441-0173; earlier airplanes reach 35,000 ft with Cessna kit SK441-36.1 From 441-0173 the certification basis also adds FAR 25.1447(c)(2), and a different flight manual applies.1 Compared with the 425, it is heavier (9,850 vs 8,600 lb), faster (245 vs 230 KIAS VMO) and certified higher.1,4
441 at a glance
- Type certificateA28CE
- ApprovedAug. 19, 1977
- Engines2× Garrett TPE331-8, 635.5 shp
- Max takeoff · landing9,850 · 9,360 lb
- Seats1 to 11
- Usable fuel475 gal
- Max operating altitude33,000 ft (to 0172) · 35,000 ft (0173 on)
- Serial numbers698, 441-0001 – 441-0362
Sources:1
Conquest II type-certificate data
The FAA data sheet does not give dimensions or cruise performance, so none are shown.
Powerplant
| Engines | Garrett TPE331-8 (-401S to -404S; -406S from 441-0340)1 |
| Rating | 635.5 shp takeoff and max continuous1 |
| Prop speed | 2,000 rpm1 |
| Propellers | Hartzell or McCauley 3-blade, reversing (matched pair)1 |
Airspeed limits & Conquest II vs Conquest I
From FAA data sheet A28CE (indicated airspeed).
| Item | 425 | 441 |
|---|---|---|
| Type certificate | A7CE (section X) | A28CE |
| Approved | July 1, 1980 | Aug. 19, 1977 |
| Engines | 2× PT6A-112 | 2× TPE331-8 |
| Power (each) | 450 shp | 635.5 shp |
| Max takeoff | 8,200 / 8,600 lb | 9,850 lb |
| Usable fuel | 366 gal | 475 gal |
| VMO | 230 KIAS | 245 KIAS |
| Max operating altitude | 30,000 ft | 33,000 / 35,000 ft |
| Seats | 6–8 | 1–11 |
| Built (by serial no.) | 236 | 363 |
Limits shown are type-certificate values. Always fly by the airplane’s own POH/AFM and placards.
Conquest II serial numbers
Parts catalogs and service bulletins use serial-number effectivity. Flying411 tags parts to these ranges so a buyer sees what fits their airplane.
| Serial range | What it means | Source |
|---|---|---|
| 698 | Listed on the data sheet ahead of 441-0001 (no further detail given). | FAA data sheet A28CE |
| 441-0001 – 441-0172 | 33,000 ft maximum altitude (35,000 ft with SK441-36); POH D1561-14-13PH. | FAA data sheet A28CE |
| 441-0173 – 441-0339 | 35,000 ft; FAR 25.1447(c)(2) added; POH D1586-11-13PH. | FAA data sheet A28CE |
| 441-0340 – 441-0362 | TPE331-8-406S engines; PC-4 from 441-0347. | FAA data sheet A28CE |
Total: 363 serial numbers.1
Cessna Conquest / Conquest II (Model 441) prices on the market
No Cessna Conquest / Conquest II (Model 441) listings on Flying411 right now.
Parts for the Cessna Conquest / Conquest II (Model 441)
No parts listed for the Cessna Conquest / Conquest II (Model 441) on Flying411 right now.
Cessna Conquest / Conquest II (Model 441) questions
Is the Cessna 441 the Conquest II?
Yes. The FAA data sheet names the 441 simply the Conquest; it was renamed Conquest II when the 425 became the Conquest I.
What engines does the Conquest II use?
Two Garrett TPE331-8 turboprops rated 635.5 shp: -401S to -404S through 441-0339 and -406S from 441-0340.
How high can a Conquest II fly?
33,000 ft for 441-0001 to 0172 and 35,000 ft from 441-0173. Earlier airplanes are approved to 35,000 ft when modified by Cessna kit SK441-36.
What is the Conquest II’s maximum takeoff weight?
9,850 lb, with 9,925 lb ramp, 9,360 lb landing and 8,500 lb zero-fuel weights.
How many Conquest II aircraft were built?
The data sheet lists 698 and 441-0001 through 441-0362: 363 serial numbers.
Buying or selling a 441?
Browse 441 listings, find parts by serial range and ATA chapter, or list your aircraft on Flying411.
Where these facts come from
Specifications, limits, approval dates and serial numbers come from FAA type certificate data sheets. “Built (by serial no.)” counts the serial numbers the FAA data sheet lists; it is not an official production total. Marketing names and history appear only where a primary source or two independent published sources agree; anything else is labeled unconfirmed. Numbers in brackets point to the list below.
- FAA Type Certificate Data Sheet A28CE, Revision 14 (April 19, 2024) — Cessna 441 Conquest: engines, limits, weights, serial numbers. drs.faa.gov
- AOPA Pilot, “Turbine Pilot Quick Look: Cessna Conquest II” (Feb. 2019). www.aopa.org
- EUROCONTROL Aircraft Performance Database, C425 entry — notes the 1983 renaming of the Corsair to Conquest I and the Conquest to Conquest II. contentzone.eurocontrol.int
- FAA Type Certificate Data Sheet A7CE, Revision 51 (Sept. 9, 2024) — Cessna 425: engines, limits, weights, serial numbers, Note 7 on the Conquest I name. drs.faa.gov
Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.
