Conquest · Variant · approved July 1, 1980

Cessna Corsair / Conquest I (Model 425)

The smaller Conquest: a PT6-powered turboprop on Cessna’s 400-series type certificate, sold first as the Corsair. Limits and serials from FAA data sheet A7CE.

None listed yetAll Conquest models
Engines
2× PT6A-112450 shp each (flat rated)
Max takeoff
8,200 / 8,600 lbby serial or SK425-17
Serials
425-0001–0236236 by serial no.
Approved
July 1, 1980FAA
Cessna 425 Conquest I twin turboprop on the ramp
Photo: André GerwingCC BY-SA 4.0
Overview

The Corsair that became the Conquest I

The Model 425 is section X of FAA Type Certificate A7CE, the certificate that also covers Cessna’s 401 to 421 piston twins. It was approved on July 1, 1980, and the data sheet titles it “Corsair or Conquest I”.1

Power is two Pratt & Whitney Canada PT6A-112 turboprops, flat rated at 450 shp for takeoff and maximum continuous, with Hartzell or McCauley three-blade reversing propellers.1 Maximum operating altitude is 30,000 ft, and 366 gal of fuel is usable.1

The data sheet splits the weights at serial 425-0177. Earlier airplanes are limited to 8,200 lb takeoff; 425-0177 on are approved for 8,600 lb, with a higher zero-fuel weight (7,000 lb vs 6,740 lb).1 Note 7 says airplanes 425-0001 to 0176 modified by Cessna kit SK425-17 get the higher weights and are renamed Conquest I.1 Cessna dropped the Corsair name for Conquest I during production.2,3

425 at a glance

  • Type certificateA7CE, section X
  • ApprovedJuly 1, 1980
  • Engines2× PT6A-112, 450 shp
  • Max takeoff8,200 lb (to 425-0176) · 8,600 lb (425-0177 on)
  • Max landing8,000 lb
  • Seats6, 7 or 8
  • Usable fuel366 gal
  • Max operating altitude30,000 ft

Sources:1

Specifications

Corsair / Conquest I type-certificate data

The FAA data sheet does not give dimensions or cruise performance, so none are shown.

Powerplant

EnginesPratt & Whitney Canada PT6A-1121
Rating450 shp takeoff and max continuous (flat rated)1
Prop speed1,900 rpm1
PropellersHartzell or McCauley 3-blade, reversing1

Weights & capacities

Max takeoff8,200 lb (to 0176) · 8,600 lb (0177 on)1
Max ramp8,275 · 8,675 lb1
Max landing8,000 lb1
Max zero fuel6,740 · 7,000 lb1
Seats6, 7 or 81
Baggage250 · 350 · 400 · 100 lb1
Fuel372.8 gal total, 366 usable1

Certification

ApprovedJuly 1, 19801
BasisParts of CAR 3 and FAR 23, plus 25.831(d), FAR 36 and SFAR 271
Max operating altitude30,000 ft1
Production certificatePC-4 from 425-02281
FAA limits

Airspeed limits & Conquest I vs Conquest II

From FAA data sheet A7CE, section X (indicated airspeed).

VMO
230
KIAS
Sea level to 21,800 ft
MMO
0.52
Mach
Above 21,800 ft
VA
154 / 157
KIAS
At 8,200 / 8,600 lb
VFE
175 / 145
KIAS
Flaps 15° / 45°
VLE
175
KIAS
Gear extended
VMCA
90 / 92
KIAS
At 8,200 / 8,600 lb
Item425441
Type certificateA7CE (section X)A28CE
ApprovedJuly 1, 1980Aug. 19, 1977
Engines2× PT6A-1122× TPE331-8
Power (each)450 shp635.5 shp
Max takeoff8,200 / 8,600 lb9,850 lb
Usable fuel366 gal475 gal
VMO230 KIAS245 KIAS
Max operating altitude30,000 ft33,000 / 35,000 ft
Seats6–81–11
Built (by serial no.)236363

Limits shown are type-certificate values. Always fly by the airplane’s own POH/AFM and placards.

Serial numbers

Corsair / Conquest I serial numbers

Parts catalogs and service bulletins use serial-number effectivity. Flying411 tags parts to these ranges so a buyer sees what fits their airplane.

Serial rangeWhat it meansSource
425-0001 – 425-01768,200 lb takeoff; eligible for 8,600 lb and the Conquest I name with Cessna SK425-17 (Note 7).FAA data sheet A7CE
425-0177 – 425-02368,600 lb takeoff, 7,000 lb zero fuel.FAA data sheet A7CE
425-0228 and onBuilt under Production Certificate No. 4.FAA data sheet A7CE

Total: 236 serial numbers.1

Market analysis

Cessna Corsair / Conquest I (Model 425) prices on the market

No Cessna Corsair / Conquest I (Model 425) listings on Flying411 right now.

Parts

Parts for the Cessna Corsair / Conquest I (Model 425)

No parts listed for the Cessna Corsair / Conquest I (Model 425) on Flying411 right now.

FAQ

Cessna Corsair / Conquest I (Model 425) questions

Is the Cessna 425 the Corsair or the Conquest I?

Both. FAA data sheet A7CE titles the Model 425 “Corsair or Conquest I”. Airplanes 425-0001 to 0176 modified by Cessna kit SK425-17 are renamed Conquest I.

What engines does the Corsair / Conquest I use?

Two Pratt & Whitney Canada PT6A-112 turboprops, flat rated at 450 shp.

What is the Corsair / Conquest I’s maximum takeoff weight?

8,200 lb for serials 425-0001 to 0176 and 8,600 lb from 425-0177, or for earlier airplanes modified with SK425-17.

How many Corsair / Conquest I aircraft were built?

The data sheet lists 425-0001 through 425-0236, which is 236 airplanes by serial number.

Why is the Corsair / Conquest I on the same type certificate as the 421?

The 425 is section X of Type Certificate A7CE, which also covers the Cessna 401, 402, 411, 414 and 421 families.

Buying or selling a 425?

Browse 425 listings, find parts by serial range and ATA chapter, or list your aircraft on Flying411.

None listed yetCreate a listing
Sources

Where these facts come from

Specifications, limits, approval dates and serial numbers come from FAA type certificate data sheets. “Built (by serial no.)” counts the serial numbers the FAA data sheet lists; it is not an official production total. Marketing names and history appear only where a primary source or two independent published sources agree; anything else is labeled unconfirmed. Numbers in brackets point to the list below.

  1. FAA Type Certificate Data Sheet A7CE, Revision 51 (Sept. 9, 2024) — Cessna 425: engines, limits, weights, serial numbers, Note 7 on the Conquest I name. drs.faa.gov
  2. AOPA Pilot, “Gentleman’s Choice: Cessna Conquest I” (Feb. 2012). www.aopa.org
  3. EUROCONTROL Aircraft Performance Database, C425 entry — notes the 1983 renaming of the Corsair to Conquest I and the Conquest to Conquest II. contentzone.eurocontrol.int

Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.