Beechcraft 60 Duke
The original pressurized Duke: two turbocharged 380 hp Lycomings, six seats and a 6,725 lb gross. Limits and serials from FAA data sheet A12CE.

Where the Duke starts
The Model 60 opened FAA Type Certificate A12CE, issued February 1, 1968, and the data sheet names it the Duke. It is a six-seat (including crew), pressurized cabin twin certified for one pilot.1
Power is two Lycoming TIO-541 engines, -E1A4 or -E1C4 in any pairing, each rated 380 hp at 2,900 rpm for takeoff and maximum continuous, with three-blade Hartzell propellers.1
The 60 has the lowest gross weight in the family, 6,725 lb. Note 4 lets a 60 run at 6,775 lb, the A60 and B60 figure, when modified to Beech drawing 60-5008 or flown with the later flight manual.1 Fuel is 142 gal usable in the wings or 204 gal with nacelle tanks as built. Full-flap speed is 134 kt, the same as the A60.1
60 Duke at a glance
- Type certificateA12CE
- ApprovedFeb. 1, 1968
- Engines2× Lycoming TIO-541, 380 hp
- Max takeoff6,725 lb (6,775 lb per Note 4)
- Seats6 including crew
- PressurizedYes (Note 3 pressure-vessel life limit)
- Serial numbersP-4–P-126 (exc. P-123)
Sources:1
60 Duke type-certificate data
The FAA data sheet does not give dimensions or cruise performance, so none are shown.
Powerplant
| Engines | Two Lycoming TIO-541-E1A4 or TIO-541-E1C4 (two of either, or one of each)1 |
| Takeoff · max continuous | 380 hp each at 2,900 rpm, 41.5 inHg1 |
| Fuel grade | 100LL or 100 minimum; 115/145 alternate1 |
| Propellers | Hartzell three-blade, 74 in (HC-F3YR-2 series hubs; Beech 60-389000 governor)1 |
Weights & capacities
| Max takeoff and landing | 6,725 lb (6,775 lb per Note 4)1 |
| Landing weight limits (Note 5) | 6,775 lb, or 6,600 / 6,450 lb with certain tire and shock-absorber combinations1 |
| Max ramp | 6,819 lb1 |
| Seats | 6 maximum, including crew1 |
| Baggage | 500 lb nose · 315 lb aft cabin1 |
| Fuel (usable) | 142 gal (wing) or 204 gal (wing and nacelle) as built; 192 or 202 gal after S.I. 0559-2811 |
| Oil | 26 qt1 |
Airspeed limits & 60 Duke vs its neighbors
From FAA data sheet A12CE (indicated airspeed; the data sheet gives mph with knots in brackets).
Flaps at the 15° approach position: 174 kt.1
| Item | 60 Duke | A60 Duke |
|---|---|---|
| Approved | Feb. 1, 1968 | Jan. 30, 1970 |
| Engines | TIO-541-E1A4/E1C4 | TIO-541-E1A4/E1C4 |
| Max weight | 6,725 lb (6,775 lb per Note 4) | 6,775 lb |
| VFE (30°) | 134 kt | 134 kt |
| Usable fuel | 142 or 204 gal | 142–204 gal (by serial) |
| Flight manual | Not specified | 60-590000-5E (P-144 on) |
| Serials | P-4–P-126 (exc. P-123) | P-123, P-127–P-246 |
| Built (by serial no.) | 122 | 121 |
All figures from FAA data sheet A12CE. Open-ended serial ranges get no built count.1
Limits shown are type-certificate values. Always fly by the airplane’s own POH/AFM and placards.
60 Duke serial numbers
Parts catalogs and service bulletins use serial-number effectivity. Flying411 tags parts to these ranges so a buyer sees what fits their airplane.
| Serial range | What it means | Source |
|---|---|---|
| P-4 – P-126 (except P-123) | All Model 60 Dukes. | FAA data sheet A12CE |
| P-4 – P-126 (except P-123) | 6,775 lb when modified to Beech Dwg. 60-5008 or using AFM 60-590000-5E (Nov. 6, 1974 or later), Note 4. | FAA data sheet A12CE |
Total: 122 serial numbers. P-123 is an A60.1
Beechcraft 60 Duke prices on the market
No Beechcraft 60 Duke listings on Flying411 right now.
Parts for the Beechcraft 60 Duke
No parts listed for the Beechcraft 60 Duke on Flying411 right now.
Beechcraft 60 Duke questions
When was the Beechcraft Duke certified?
The FAA issued Type Certificate A12CE for the Model 60 Duke on February 1, 1968.
Is the Duke pressurized?
Yes. The data sheet sets a fuselage pressure-vessel life limit (Note 3) and a 30,000 ft maximum operating altitude.
Can a Model 60 be operated at 6,775 lb?
Yes, when modified to Beech drawing 60-5008 or flown with flight manual 60-590000-5E dated November 6, 1974 or later (Note 4). Otherwise the limit is 6,725 lb.
How many Model 60 Dukes were built?
122 by serial number: P-4 through P-126, except P-123.
What engines does the Duke 60 use?
Two Lycoming TIO-541-E1A4 or -E1C4 engines, 380 hp each for takeoff.
Buying or selling a 60 Duke?
Browse 60 Duke listings, find parts by serial range and ATA chapter, or list your aircraft on Flying411.
Where these facts come from
Specifications, limits, approval dates and serial numbers come from FAA type certificate data sheets. “Built (by serial no.)” counts the serial numbers the FAA data sheet lists; it is not an official production total. Marketing names and history appear only where a primary source or two independent published sources agree; anything else is labeled unconfirmed. Numbers in brackets point to the list below.
- FAA Type Certificate Data Sheet A12CE, Revision 27 (Nov. 27, 2017) — Beechcraft 60, A60, B60 Duke. drs.faa.gov
Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.
