Beechcraft Duke
A six-seat pressurized piston twin with two turbocharged 380 hp Lycomings. Three models on one FAA data sheet, A12CE, issued Feb. 1, 1968.

The Duke line in context
All three Dukes share one section of FAA Type Certificate A12CE, issued February 1, 1968 under FAR Part 23 with special conditions, and the data sheet names each one Duke. The certificate passed from Beech to Raytheon (1996), Hawker Beechcraft (2007), Beechcraft Corporation (2013) and Textron Aviation (October 12, 2016).1
Every Duke is pressurized, seats six including the pilot, flies to 30,000 ft and uses two turbocharged 380 hp Lycoming TIO-541 engines. It is approved for flight into known icing when equipped as the flight manual specifies.1
The 60 (approved 1968) has a 6,725 lb gross; the A60 (approved 1970) raised it to 6,775 lb; the B60 (approved 1973) raised the full-flap speed and added optional tip tanks.1
At a glance
- TypePressurized twin-engine piston, 6 seats
- Type certificateA12CE
- Certificate holderTextron Aviation Inc.
- Engines2× Lycoming TIO-541-E1A4/-E1C4, 380 hp
- Max weight6,725 lb (60) · 6,775 lb (A60, B60)
- Max operating altitude30,000 ft
- Production certificatePC No. 8
Sources:1
Every Duke model
Approval dates are FAA type-certificate approvals, not model years. “Built” counts serial numbers listed per model.1
| Model | Approved | Max weight | VFE (30°) | Usable fuel | Key change | Built (by serial no.) | Page |
|---|---|---|---|---|---|---|---|
| 60 Duke | Feb. 1, 1968 | 6,725 lb (6,775 lb per Note 4) | 134 kt | 142 or 204 gal | Original; 6,725 lb | 122 | Variant page → |
| A60 Duke | Jan. 30, 1970 | 6,775 lb | 134 kt | 142–204 gal (by serial) | 6,775 lb; baffled tanks from P-196 | 121 | Variant page → |
| B60 Duke | Oct. 5, 1973 | 6,775 lb | 140 kt | 202 or 232 gal | 140 kt flaps; tip tanks; E1C4 only from P-523 | Open-ended | Variant page → |
Related, but not on its own page
These aircraft share the family name, type certificate or airframe but are covered here rather than on their own page. Parts fitment often differs, so check the serial number.
Beechcraft 60 Duke prices on the market
No Beechcraft 60 Duke listings on Flying411 right now.
Parts for the Beechcraft 60 Duke
No parts listed for the Beechcraft 60 Duke on Flying411 right now.
Beechcraft 60 Duke questions
What is the difference between the Duke 60, A60 and B60?
The 60 is certified at 6,725 lb; the A60 at 6,775 lb; the B60 keeps 6,775 lb, raises full-flap speed from 134 to 140 kt and adds optional 232 gal tip tanks.
Is the Beechcraft Duke pressurized?
Yes. All three models are pressurized and certified to 30,000 ft.
Is the Duke approved for known icing?
Yes, when equipped as specified in the approved flight manual and its icing supplements.
Who holds the Duke type certificate today?
Textron Aviation Inc., since October 12, 2016.
Is the turbine Duke a Beechcraft model?
No. The Royal Turbine Duke is an aftermarket PT6A conversion of the B60 under a supplemental type certificate held by Northwest Turbine LLC.
Buying or selling a Duke?
Browse Duke listings, find parts by model and ATA chapter, or list your aircraft on Flying411.
Where these facts come from
Specifications, limits, approval dates and serial numbers come from FAA type certificate data sheets. “Built (by serial no.)” counts the serial numbers the FAA data sheet lists; it is not an official production total. Marketing names and history appear only where a primary source or two independent published sources agree; anything else is labeled unconfirmed. Numbers in brackets point to the list below.
- FAA Type Certificate Data Sheet A12CE, Revision 27 (Nov. 27, 2017) — Beechcraft 60, A60, B60 Duke. drs.faa.gov
- General Aviation News, “‘Royal Turbine’ Duke certified” (July 7, 2006). generalaviationnews.com
- The Aviation DataBase STC listing for Northwest Turbine LLC, STC SA01672SE (reflects FAA DRS records). www.airresearch.com
Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.
