Cessna 310 · Variant · Model years not stated by the FAA

Cessna 310I

The 310I, approved December 1963: IO-470-U engines, 120 lb baggage lockers in each engine nacelle and flaps reduced to 35°.

None listed yetAll 310 models
Engine
Continental IO-470-U2 × 260 hp
Max weight
5,100 lbnormal category
Serials
310I0001through 310I0200
Built (by serial no.)
200serial numbers
Cessna 310I exterior on the ramp
Photo: 先従隗始CC0
Overview

The 310I in context

The 310I was approved on December 20, 1963, in Section XI of FAA data sheet 3A10.1

It changes to the Continental IO-470-U (still 260 hp at 2,625 rpm), adds 120 lb of baggage in each engine nacelle and limits flap travel to 35° instead of 45°. Maneuvering speed rises to 148 knots TIAS.1

Takeoff and landing weights stay at the 310H’s 5,100 lb. No model years are given.1

310I at a glance

  • Type certificate3A10, Section XI
  • Name on the FAA data sheetModel 310I
  • ApprovedDecember 20, 1963
  • Model yearsNot stated in the FAA data sheet
  • Seats5 standard (optional arrangements per the manufacturer’s weight-and-balance data)
  • Engine2 × Continental IO-470-U
  • Rating260 hp each at 2,625 rpm (all operations)
  • Max weight5,100 lb takeoff
  • Fuel102 gal (two 51-gal wing-tip tanks); Note 1 also covers optional two 15.5-gal auxiliary tanks
  • Serial numbers310I0001–310I0200
  • Built (by serial no.)200

FAA TCDS 3A10.1

FAA type certificate

310I specs and limits

From FAA Type Certificate Data Sheet 3A10, Section XI.1 These are certification limits, not brochure performance. Individual airplanes differ; use the aircraft’s own POH/AFM and weight-and-balance records.

Powerplant

Engine2 × Continental IO-470-U
Rating260 hp each at 2,625 rpm (all operations)
Minimum fuel gradeGrade 100 or 100LL aviation gasoline

Weights & capacity

Max takeoff weight5,100 lb
Seats5 standard (optional arrangements per the manufacturer’s weight-and-balance data)
Max baggage200 lb aft cabin (+96), 80 lb per side on the floor (+124), 120 lb per engine nacelle (+63)
Fuel capacity102 gal (two 51-gal wing-tip tanks); Note 1 also covers optional two 15.5-gal auxiliary tanks

Airframe & approvals

Wing flaps0° to 35°
VNE
220
kn
Never exceed · 254 mph
VNO
183
kn
Max structural cruising · 210 mph
VA
148
kn
Maneuvering · 170 mph
VFE
122
kn
Flaps extended · 140 mph
VLE
122
kn
Landing gear extended · 140 mph
VMC
85
mph
Minimum single-engine speed (placard, CAS)

The data sheet labels these limits TIAS. VMC is the single-engine placard speed (CAS) from TCDS Note 2.1

What changed

310I vs the models around it

From the 310H
Engine 2 × Continental IO-470-D → 2 × Continental IO-470-U; landing flap travel 45° → 35°.1
On to the 310J
The same engine, rating, fuel grade, maximum weight, fuel capacity, never-exceed speed and flap travel.1
Item310H310I (this page)310J
ApprovedJuly 19, 1962December 20, 1963September 3, 1964
Engine2 × Continental IO-470-D2 × Continental IO-470-U2 × Continental IO-470-U
Rating2 × 260 hp · 2,625 rpm2 × 260 hp · 2,625 rpm2 × 260 hp · 2,625 rpm
Minimum fuel grade100/100LL100/100LL100/100LL
Max weight (normal category, landplane)5,100 lb5,100 lb5,100 lb
Fuel (total / usable)102 gal tip tanks102 gal tip tanks102 gal tip tanks
Never-exceed speed (VNE)220 kn (254 mph)220 kn (254 mph)220 kn (254 mph)
Landing flap travel45°35°35°
Serial numbers310H0001–310H0148310I0001–310I0200310J0001–310J0200

All values from FAA TCDS 3A101. Normal-category landplane values unless noted.

Serial numbers

310I serial numbers

Parts catalogs and service bulletins use serial-number effectivity. Flying411 tags parts to these FAA ranges so a buyer can see what fits a given airplane.

Serial numbersModel year / what applies
310I0001 – 310I0200All 310I aircraft

Built (by serial no.): 200, counted from the serial numbers FAA data sheet 3A10 lists for the 310I.1 A serial count is the most exact production figure published; it can include prototypes, and a few airframes may have been converted or not completed.

Market analysis

Cessna 310I prices on the market

No Cessna 310I listings on Flying411 right now.

Parts

Parts for the Cessna 310I

No parts listed for the Cessna 310I on Flying411 right now.

FAQ

Cessna 310I questions

What engine does the 310I have?

The FAA data sheet lists the 2 × Continental IO-470-U, rated 260 hp each at 2,625 rpm (all operations).1

How many 310I airplanes were built?

The FAA data sheet lists 200 serial numbers for the 310I.1 That is a count of serial numbers, the most exact figure published; a few may not have been completed or may have been converted.

What serial numbers are 310I aircraft?

310I0001 through 310I0200.1

What is the maximum weight of the 310I?

5,100 lb for takeoff and landing.1

What model years is the 310I?

The FAA data sheet does not give model years for the 310I; it lists an approval date of December 20, 1963 and the serial numbers. We have not found a primary source for the model years, so we don’t state them. A TC approval date is not a model year.1

Buying or selling a 310I?

Browse current 310I listings, find parts by serial number and ATA chapter, or list your aircraft on Flying411.

None listed yetCreate a listing
Sources

Where these facts come from

Limits, approval dates and serial numbers come from FAA type certificate data sheet 3A10. The data sheet gives no model years for the 310 series, and we have not found a primary source for them, so no model years are shown. Numbers in brackets on this page point to the list below.

  1. FAA Type Certificate Data Sheet 3A10, Revision 64 (May 9, 2024) — Cessna/Textron Models 310 through T310R: engines, weights, airspeed limits, serial numbers, approval dates. drs.faa.gov

Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.