Cessna 310 · Variant · Model years not stated by the FAA

Cessna 310C

The 310C moved to fuel-injected 260 hp Continental IO-470-Ds and a 4,830 lb takeoff weight. Approved October 1958.

None listed yetAll 310 models
Engine
Continental IO-470-D2 × 260 hp
Max weight
4,830 lbnormal category
Serials
35550, 35772–35999and 39001–39031
Built (by serial no.)
260serial numbers
Cessna 310C exterior on the ramp
Photo: ZLEACC BY-SA 4.0
Overview

The 310C in context

The 310C was approved on October 22, 1958, in Section IV of FAA data sheet 3A10.1

It is the first civil 310 on the data sheet with the Continental IO-470-D, rated 260 hp at 2,625 rpm, in place of the 240 hp O-470. Takeoff weight rises to 4,830 lb (landing 4,600 lb) and maximum structural cruising speed to 183 knots TIAS.1

Its serials start a new 39001 block after 35999. No model years are given.1

310C at a glance

  • Type certificate3A10, Section IV
  • Name on the FAA data sheetModel 310C
  • ApprovedOctober 22, 1958
  • Model yearsNot stated in the FAA data sheet
  • Seats5 standard (optional arrangements per the manufacturer’s weight-and-balance data)
  • Engine2 × Continental IO-470-D
  • Rating260 hp each at 2,625 rpm (all operations)
  • Max weight4,830 lb takeoff; 4,600 lb landing
  • Fuel102 gal (two 51-gal wing-tip tanks); Note 1 also covers optional two 15.5-gal auxiliary tanks
  • Serial numbers35550, 35772–35999, 39001–39031
  • Built (by serial no.)260

FAA TCDS 3A10.1

FAA type certificate

310C specs and limits

From FAA Type Certificate Data Sheet 3A10, Section IV.1 These are certification limits, not brochure performance. Individual airplanes differ; use the aircraft’s own POH/AFM and weight-and-balance records.

Powerplant

Engine2 × Continental IO-470-D
Rating260 hp each at 2,625 rpm (all operations)
Minimum fuel gradeGrade 100 or 100LL aviation gasoline

Weights & capacity

Max takeoff weight4,830 lb
Max landing weight4,600 lb
Seats5 standard (optional arrangements per the manufacturer’s weight-and-balance data)
Max baggage200 lb (aft cabin, +96)
Fuel capacity102 gal (two 51-gal wing-tip tanks); Note 1 also covers optional two 15.5-gal auxiliary tanks

Airframe & approvals

Wing flaps0° to 45°
VNE
215
kn
Never exceed · 248 mph
VNO
183
kn
Max structural cruising · 210 mph
VA
143
kn
Maneuvering · 164 mph
VFE
122
kn
Flaps extended · 140 mph
VLE
122
kn
Landing gear extended · 140 mph
VMC
86
mph
Minimum single-engine speed (placard, TIAS)

The data sheet labels these limits TIAS. VMC is the single-engine placard speed from TCDS Note 2.1

What changed

310C vs the models around it

From the 310B
Engine 2 × Continental O-470-M → 2 × Continental IO-470-D; rating 2 × 240 hp · 2,600 rpm → 2 × 260 hp · 2,625 rpm; maximum weight 4,700 lb (landing 4,600) → 4,830 lb (landing 4,600).1
On to the 310D
The same engine, rating, fuel grade, maximum weight, fuel capacity, never-exceed speed and flap travel.1
Item310B310C (this page)310D
ApprovedMay 23, 1957October 22, 1958July 8, 1959
Engine2 × Continental O-470-M2 × Continental IO-470-D2 × Continental IO-470-D
Rating2 × 240 hp · 2,600 rpm2 × 260 hp · 2,625 rpm2 × 260 hp · 2,625 rpm
Minimum fuel grade100/100LL100/100LL100/100LL
Max weight (normal category, landplane)4,700 lb (landing 4,600)4,830 lb (landing 4,600)4,830 lb (landing 4,600)
Fuel (total / usable)102 gal tip tanks102 gal tip tanks102 gal tip tanks
Never-exceed speed (VNE)215 kn (248 mph)215 kn (248 mph)215 kn (248 mph)
Landing flap travel45°45°45°
Serial numbers607, 35547–35549, 35551–3577135550, 35772–35999, 39001–3903139032–39264

All values from FAA TCDS 3A101. Normal-category landplane values unless noted.

Serial numbers

310C serial numbers

Parts catalogs and service bulletins use serial-number effectivity. Flying411 tags parts to these FAA ranges so a buyer can see what fits a given airplane.

Serial numbersModel year / what applies
35550Individual serial listed for the 310C
35772 – 35999310C
39001 – 39031310C; new 39xxx block

Built (by serial no.): 260, counted from the serial numbers FAA data sheet 3A10 lists for the 310C.1 A serial count is the most exact production figure published; it can include prototypes, and a few airframes may have been converted or not completed.

Market analysis

Cessna 310C prices on the market

No Cessna 310C listings on Flying411 right now.

Parts

Parts for the Cessna 310C

No parts listed for the Cessna 310C on Flying411 right now.

FAQ

Cessna 310C questions

What engine does the 310C have?

The FAA data sheet lists the 2 × Continental IO-470-D, rated 260 hp each at 2,625 rpm (all operations).1

How many 310C airplanes were built?

The FAA data sheet lists 260 serial numbers for the 310C.1 That is a count of serial numbers, the most exact figure published; a few may not have been completed or may have been converted.

What serial numbers are 310C aircraft?

35550, 35772–35999 and 39001–39031.1

What is the maximum weight of the 310C?

4,830 lb for takeoff and 4,600 lb for landing.1

What model years is the 310C?

The FAA data sheet does not give model years for the 310C; it lists an approval date of October 22, 1958 and the serial numbers. We have not found a primary source for the model years, so we don’t state them. A TC approval date is not a model year.1

Buying or selling a 310C?

Browse current 310C listings, find parts by serial number and ATA chapter, or list your aircraft on Flying411.

None listed yetCreate a listing
Sources

Where these facts come from

Limits, approval dates and serial numbers come from FAA type certificate data sheet 3A10. The data sheet gives no model years for the 310 series, and we have not found a primary source for them, so no model years are shown. Numbers in brackets on this page point to the list below.

  1. FAA Type Certificate Data Sheet 3A10, Revision 64 (May 9, 2024) — Cessna/Textron Models 310 through T310R: engines, weights, airspeed limits, serial numbers, approval dates. drs.faa.gov

Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.