Cessna 150F
Approved in May 1965. The data sheet lists its flaps as 0–40° ±2°, with no notch positions, rather than the four notches of earlier 150s.

The 150F in context
The 150F was approved on May 27, 1965, the last model in section II of TCDS 3A19.1 Weight, fuel, baggage and airspeed limits match the 150D and 150E.
The difference the data sheet records is the flap travel: earlier models list four notches (10°, 20°, 30°, 40°), while the 150F lists “Down 0° – 40° ±2°”.1 Its serial block, 15061533 to 15064532, is 3,000 numbers long.
Compared with the 150E before it, the FAA data sheet shows: flap travel 4 notches, 10–40° → 0–40° ±2° (no notch positions listed). The 150G that followed changed: a seaplane approval (land and sea; seaplane maximum weight 1,650 lb), with the landplane unchanged at Utility category and 1,600 lb.1 For every model in the family, see the Cessna 150 and 152 hub.
150F at a glance
- Type certificate3A19
- FAA approvalMay 27, 1965
- Model yearsNot stated in the FAA data sheet
- Seats / category2 seats · utility category
- EngineContinental O-200-A, 100 hp at 2,750 rpm
- Max takeoff weight1,600 lb
- Fuel26 gal total · 22.5 usable
- Serial numbers15061533 – 15064532
FAA TCDS 3A19.1
Type-certificate 150F specs
From FAA Type Certificate Data Sheet 3A19, which lists engines, weights, fuel and limits but not cruise speed or range.1 Individual aircraft differ; use the aircraft’s own POH/AFM and weight-and-balance records.
Powerplant
| Engine | Continental O-200-A |
| Rating | 100 hp at 2,750 rpm |
Weights & capacity
| Max takeoff weight | 1,600 lb |
| Fuel | 26 gal total · 22.5 usable |
| Seats / category | 2 seats · utility category |
Certification
| Type certificate | 3A19 |
| FAA approval | May 27, 1965 |
| Model years | Not stated in the FAA data sheet |
| Serial numbers | 15061533 – 15064532 |
| Built (by serial no.) | 3,000 |
Airspeed limits & 150F vs. neighbors
Calibrated airspeeds (CAS) from TCDS 3A19, section II. Comparison with the model before and after it, from FAA TCDS 3A19.1
| Item | 150E | 150F (this page) | 150G |
|---|---|---|---|
| FAA approval | June 18, 1964 | May 27, 1965 | May 5, 1966 (seaplane Aug. 12, 1966) |
| Category | Utility | Utility | Utility; land and sea |
| Engine | O-200-A, 100 hp | O-200-A, 100 hp | O-200-A, 100 hp |
| Max weight | 1,600 lb | 1,600 lb | 1,600 lb (seaplane 1,650 lb) |
| Fuel | 26 gal total · 22.5 usable | 26 gal total · 22.5 usable | 26 gal total · 22.5 usable |
| Baggage | 120 lb | 120 lb | 120 lb |
| Never exceed | 141 KCAS | 141 KCAS | 141 KCAS |
| Max structural cruising | 104 KCAS | 104 KCAS | 104 KCAS |
| Maneuvering | 95 KCAS | 95 KCAS | 95 KCAS |
| Flaps extended | 87 KCAS | 87 KCAS | 87 KCAS |
| Flap travel | 4 notches, 10–40° | 0–40° ±2° (no notch positions listed) | 0–40° ±2° (no notch positions listed) |
| Electrical | 14-volt | 14-volt | 14-volt |
Limits shown are type-certificate values. Always fly by the airplane’s own POH/AFM and placards.
150F serial breaks that matter
Parts catalogs and service bulletins use serial-number effectivity. Flying411 tags 150F parts to these ranges so a buyer sees what fits their airplane.
| Serial range | What it means | Source |
|---|---|---|
| 15061533 – 15064532 | All Model 150F aircraft – 3,000 serial numbers, the largest block of any 150 before the 150L. | TCDS 3A191 |
| All serials listed | 14-volt electrical system (NOTE 5 applies to 150-series serials through 15079405). | TCDS 3A19, NOTE 51 |
Serial ranges are those listed on the FAA data sheet. Effectivity breaks inside a range will be added from the Textron parts catalog.
Cessna 150F prices on the market
No Cessna 150F listings on Flying411 right now.
Parts for the Cessna 150F
No parts listed for the Cessna 150F on Flying411 right now.
Cessna 150F questions
When was the Cessna 150F approved?
The FAA approved the 150F on May 27, 1965. The data sheet does not state model years for the 150F.
What engine does the Cessna 150F have?
The FAA data sheet lists the 150F with a Continental O-200-A, rated 100 hp at 2,750 rpm.
What serial numbers are 150F aircraft?
The FAA data sheet lists 150F serial numbers 15061533 – 15064532. That is 3,000 serial numbers.
How is the 150F different from the 150E?
From the FAA data sheet: flap travel: 4 notches, 10–40° on the 150E, 0–40° ±2° (no notch positions listed) on the 150F.
Buying or selling a 150F?
Browse current 150F listings, find parts by serial range and ATA chapter, or list your aircraft on Flying411.
Where these facts come from
Specifications, limits, approval dates and serial numbers come from FAA Type Certificate Data Sheet 3A19. Model years appear only where that data sheet lists serials by model year; serial counts are computed from its serial lists. Numbers in brackets on this page point to the list below.
- FAA Type Certificate Data Sheet 3A19, Revision 51 (Aug. 1, 2024) — Models 150 through 150M, A150K–A150M, 152 and A152: engines, weights, fuel, airspeed limits, serial numbers, approval dates. drs.faa.gov
Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.
