Beechcraft King Air 90
The first King Air: a Queen Air-derived turboprop twin with 500 shp PT6A-6 engines, a 9,300 lb gross and seats for ten.

The King Air 90 (Model 65-90) in context
The Model 65-90 was approved on May 19, 1964 and is listed on Type Certificate 3A20 alongside the piston Queen Air models it was developed from. The data sheet calls it a 10-place (PCLM) normal-category airplane, serials LJ-1 through LJ-113 except LJ-76.1
It has two PT6A-6 turboprops of 500 shp (PT6A-20 also approved), three-blade Hartzell propellers, 384 gallons usable and a 30,000 ft operating limit. Maximum operating speed is 208 knots.1
Weight depends on serial: LJ-1 – LJ-22 are 9,000 lb unless Beech Kit 90-4001 is installed, which allows 9,300 lb; later serials are eligible for 9,300 lb. Any 65-90 can be converted to PT6A-20 engines by Beech kit.1
The King Air A90 (Model 65-A90) that followed changed: engines 2× PT6A-6 or PT6A-20 → 2× PT6A-20; takeoff rating 500 shp → 500 shp (550 shp with kits); max takeoff weight 9,000 / 9,300 lb → 9,300 lb (9,650 lb with kit).1 For every model in the family, see the Beechcraft King Air 90 series hub.
King Air 90 (Model 65-90) at a glance
- Type certificate3A20
- FAA approvalMay 19, 1964
- Model yearsNot stated in the FAA data sheet
- Seats / category10 PCLM (2 crew)
- EngineTwo UACL/Pratt & Whitney Canada PT6A-6 (or PT6A-20) turboprops, 500 shp takeoff each (PT6A-6: 525 eshp; PT6A-20: 527 eshp)
- Max takeoff weight9,000 or 9,300 lb takeoff · 8,550 or 8,835 lb landing (NOTE 7)
- Fuel384 gal usable (two 61-gal nacelle + two 131-gal wing tanks)
- Serial numbersLJ-1 – LJ-113 (except LJ-76)
- Max operating altitude30,000 ft pressure altitude
- Known icingNOTE 26: eligible for flight into known icing with the required equipment installed and operating.
FAA TCDS 3A20.1
Type-certificate King Air 90 (Model 65-90) specs
From FAA Type Certificate Data Sheet 3A20, which lists engines, weights, fuel and limits but not cruise speed or range.1 Individual aircraft differ; use the aircraft’s own POH/AFM and weight-and-balance records.
Powerplant
| Engine | Two UACL/Pratt & Whitney Canada PT6A-6 (or PT6A-20) turboprops |
| Rating | 500 shp takeoff each (PT6A-6: 525 eshp; PT6A-20: 527 eshp) |
Weights & capacity
| Max takeoff weight | 9,000 or 9,300 lb takeoff · 8,550 or 8,835 lb landing (NOTE 7) |
| Fuel | 384 gal usable (two 61-gal nacelle + two 131-gal wing tanks) |
| Seats / category | 10 PCLM (2 crew) |
Certification
| Type certificate | 3A20 |
| FAA approval | May 19, 1964 |
| Model years | Not stated in the FAA data sheet |
| Serial numbers | LJ-1 – LJ-113 (except LJ-76) |
| Built (by serial no.) | 112 |
Airspeed limits & King Air 90 (Model 65-90) vs. neighbors
Knots as listed on the data sheet (it gives mph with knots in parentheses). Comparison with the model before and after it, from FAA TCDS 3A20.1
| Item | King Air 90 (Model 65-90) (this page) | King Air A90 (Model 65-A90) |
|---|---|---|
| FAA approval | May 19, 1964 | Mar. 7, 1966 |
| Engines | 2× PT6A-6 or PT6A-20 | 2× PT6A-20 |
| Takeoff rating | 500 shp | 500 shp (550 shp with kits) |
| Max takeoff weight | 9,000 / 9,300 lb | 9,300 lb (9,650 lb with kit) |
| Usable fuel | 384 gal | 384 gal |
| Seats (PCLM) | 10 | 10 |
| Max operating speed | 208 kt | 208 kt |
| Propellers | 3-blade Hartzell | 3-blade Hartzell |
| Max operating altitude | 30,000 ft | 30,000 ft |
Limits shown are type-certificate values. Always fly by the airplane’s own POH/AFM and placards.
King Air 90 (Model 65-90) serial breaks that matter
Parts catalogs and service bulletins use serial-number effectivity. Flying411 tags King Air 90 (Model 65-90) parts to these ranges so a buyer sees what fits their airplane.
| Serial range | What it means | Source |
|---|---|---|
| LJ-1 – LJ-113 (except LJ-76) | Model 65-90; PT6A-6 or PT6A-20 | TCDS 3A201 |
| LJ-1 – LJ-22 | 9,300 lb takeoff / 8,835 lb landing only with Beech Kit 90-4001; later serials eligible as built (NOTE 7) | TCDS 3A201 |
| LJ-1 – LJ-113 (except LJ-76) | PT6A-20 conversion by Beech Kit 90-9027 (NOTE 11) | TCDS 3A201 |
Serial ranges are those listed on the FAA data sheet. Effectivity breaks inside a range will be added from the Textron parts catalog.
Beechcraft King Air 90 (Model 65-90) prices on the market
No Beechcraft King Air 90 (Model 65-90) listings on Flying411 right now.
Parts for the Beechcraft King Air 90 (Model 65-90)
No parts listed for the Beechcraft King Air 90 (Model 65-90) on Flying411 right now.
Beechcraft King Air 90 (Model 65-90) questions
When was the Beechcraft King Air 90 (Model 65-90) approved?
The FAA approved the King Air 90 (Model 65-90) on May 19, 1964. The FAA data sheet does not state model years for the King Air 90.
What engines does the Beechcraft King Air 90 (Model 65-90) have?
The FAA data sheet lists the King Air 90 (Model 65-90) with two UACL/Pratt & Whitney Canada PT6A-6 (or PT6A-20) turboprops, rated 500 shp takeoff each (PT6A-6: 525 eshp; PT6A-20: 527 eshp).
What serial numbers are King Air 90 (Model 65-90) aircraft?
The FAA data sheet lists King Air 90 (Model 65-90) serial numbers LJ-1 – LJ-113 (except LJ-76). That is 112 serial numbers.
Buying or selling a King Air 90 (Model 65-90)?
Browse current King Air 90 (Model 65-90) listings, find parts by serial range and ATA chapter, or list your aircraft on Flying411.
Where these facts come from
Limits, weights, approval dates and serial numbers come from FAA Type Certificate Data Sheets 3A20 (65-90 through C90GTi) and A31CE (F90). The C90B and C90GTx are not on the data sheets; what is said about them comes from two independent secondary sources each and is labeled as such. Numbers in brackets on this page point to the list below.
- FAA Type Certificate Data Sheet 3A20, Revision 82 (Sept. 5, 2019) — Models 65-90, 65-A90, B90, C90, C90A, C90GT, C90GTi, E90 and H90 (and Queen Air models): engines, weights, fuel, airspeed limits, serial numbers, approval dates. drs.faa.gov
Content reviewed Nov. 15, 2026. Always use the aircraft’s own POH/AFM, logbooks and current FAA records for operational or airworthiness decisions.
